Vibration Molded Graphite

Vibration Molded Graphite

Vibration molded graphite block and rod, large size available.


Vibrated Graphite 1
Vibrated Graphite 2
Vibrated Graphite 3

Brief Introduction

M.T.E Carbon can supply a series of vibration molding graphite from coarse grain to medium grain, available mainly as block and round with the grain size in 0.8 – 4mm.

Machined parts, such as plates, bricks, discs, crucibles and sleeves can also be manufactured.

Technical Property

Item Unit VMG1 VMG2 VMG3
Density g/cm3 1.72-1.76 1.68-1.71 1.62-1.67
Max Grain Size mm 0.8 2 4
Compressive Strength Mpa ≥35 ≥30 ≥27
Flexural Strength Mpa ≥15 ≥13 ≥8
Electric Resistivity μΩm ≤8.5 ≤9 ≤10
C.T.E. 10-6/℃ ≤2.5 ≤2.8 ≤4
Ash % ≤0.2 ≤0.3 ≤0.3


Crucibles, casting molds, resistance heating elements, channels, parts for heat exchangers, furnace linings, head electrodes for Acheson furnace, anode for metal electrolysis, boats and trays for sintering, heat shields and covers of furnace, and etc.

Typical Size

Block Round
1350*1220*610mm 2200*1120*400mm Dia1550*500mm Dia1400*500mm
1800*940*500mm 1800*810*500mm Dia1270*580mm Dia1120*580mm
1800*760*500mm 1800*600*600mm Dia1000*580mm Dia910*600mm
1800*500*500mm 1800*400*400mm Dia760*600mm Dia600*1800mm

Note: Other sizes and machined parts could be manufactured on requests.