Die-molded Graphite

High purity die-molded graphite block and rod

Details

Features of Die-molded Graphite (M Series):

1.High density / Fine grain size / High purity / High strength / Low specific resistance / Ease of precise machining.

2.Excellent thermal shock resistance to high temperature and oxidation / Good anticorrosion.

Application:

Semiconductor (Monocrystalline Silicon) / Vacuum furnace / Continuous casting / Sealing products / Space & medical industry / Forge moulds EDM. Heaters / Heat shields /Electronic tube anodes / Melting and sintering moulds.

Note:

Ash content of all grades can be purified to 50 PPM.

Special property requirement specially produced.

Larger size specially pressed.

Smaller size further machined.

Machined parts done to drawings

Anticorrosion cover available(SiC Cover, Pitch Cover, etc).

Material Property:

Regular Sizes:

2100×510×510	Ф1150×350	510×310×150	Ф470×410
1180×1180×260	Ф1050×350	770×210×210	Ф410×520
1100×1100×260	Ф960×700	770×210×150	Ф410×410
1250×650×280	Ф880×760	670×210×210	Ф380×380
1250×530×280	Ф830×740	670×210×150	Φ340×260
1250×410×280	Ф760×700	670×210×125	Ф300×450
1000×500×260	Ф700×700	430×260×150	Ф300×260
550×410×410	Ф640×630	430×260×125	Φ260×520
900×310×310	Ф620×630	380×300×180	Ф250×380
900×310×210	Ф600×630	380×300×150	Ф250×250
620×510×210	Ф560×520	380×280×180	Ф180×250
550×410×210	Ф510×520	380×280×150	330×280×150
510×310×210	Ф510×430	490×140×140	320×320×150
510×310×180	Ф470×520	430×125×125	310×310×150